
ODYS Slim TV 10
29
EN
8 Playback operation
8.1 Getting started
1
Connect the device to a mains socket using the power supply unit that is delivered
with the device.
2
Push the POWER ON/OFF switch on the left side of the device to the ON
position. The device's power supply indicator lamp lights up green, and a
welcome screen is displayed.
3
Remove the transportation safety lock from the DVD drive.
4
Open the DVD tray on the back side, with the printing to the rear and place a disc
into the tray, then close the tray (see illustration).
5
Insure that the DVD mode has been selected.
The DVD player automatically starts with the playback.
6
Adjust the volume to the desired level using the VOLUME controller on the right
side.
7
Press the PWR button on the remote control. The DVD player switches to standby
mode and the power supply indicator lamp lights up red.
Operating the device and general buttons
Depending on the situation, you can use the buttons on the device or remote control to
operate the device. However, the remote control enables greater usage of the device
functions.
P-MENU button
(device)
To change brightness, contrast or colour. Adjust the values using
the
+/-
buttons.
ZOOM button
(remote control)
For DVDs the image size is successively changed to the following
values compared to the normal size: 2x, 3x, 4x, 1/2, 1/3, 1/4.
This function is not available for CDs.