Playback Operation
- 20 -
Playback Operation
Pre-Operation
1.
Connect DVD Player to power source.
2.
Unlock and lift the LCD screen up.
3.
Switch the “POWER” to the “ON” position.
4.
Press the “OPEN” button to open the disc cover.
5.
Put the disc into the tray with the printed side facing up.
6.
Close the disc tray cover by pressing the area of the disc cover that says “Press”.
The player will automatically search for the disc and start playback.
7. Adjust the volume with the “VOLUME” control (also adjusts headphone volume if
using headphones).
General Playback Operation
Pause
Press the Pause button once on remote control or the
PLAY/PAUSE button on the
front panel to pause playback.
Press the PLAY or PAUSE button on the remote control or the
PLAY/PAUSE button
on the front panel to resume normal playback.
Resume Playback
During playback, Press the STOP button on the remote control or the
button on the
front panel once. The DVD Player will memorize the location where playback of the
disc was stopped.
Press the PLAY button on the remote control or the
button on the front panel to
resume normal playback. The DVD Player will resume the playback of the disc from
the location where it was stopped. This function will not operate if the disc is removed
from the DVD Player.
Press the STOP button twice (2). Playback of the disc will stop. When the PLAY
button on the remote control or the
button on the front panel is pressed again,
playback of the disc will start from the beginning of disc.
Screen Modes
Press the MODE button on the front panel to change the screen aspect ratio to 16:9
or 4:3 mode.
Zoom
Press the ZOOM button on the remote control to cycle through the different zoom
settings. While in the zoom mode use the direction buttons to move the picture.
