9
USE
Autostart can be activated ON or deactivated OFF. If it is set ON, the curtain rail will
not require any setting of time or date when the power is conneted. This function is
suited for rail only used with manual setting, i.g. for demonstration in shops, where the
power is disconnected at closing time. Then it is not necessary to set the time every
day, when the power gets back on.
Menu item Manual
Scrolling to the next menu item, the display will show:
Press the middle button to enter the menu item. Here you can choose between:
and
If Manual is ON; the curtain rails must be operated manually by means of the lower
button to draw the curtains or by using the remote control. Press the middle button to
confirm your selection and wait until the display turns off or choose the previous or
next menu item.
Next menu item:
Press the middle button to enter, and select between:
Autostart
Screensaver
None
Show time
Show date
Show temp.
Manual: On
Manual: Off
Manual
Press the screensaver you wish end press enter to confirm. The display will now show
the selected screensaver permanently (turns off, while the curtain is drawn). Last menu
item:
12
With the remote control you can choose to control one curtain rail at a time. The remote
control can control up to 4 individual curtain rails.
Press the left
button shortly
to draw the
curtain forth.
Pressing the
button shortly
again will stop
the curtain.
Press the right
button shortly
to draw the
curtain back.
Pressing the
button shortly
again will stop
the curtain.
The illustration shows:
l
Button 1 controls the curtain rail in the left window (red line).
l
Button 2 controls the curtain rail in the second window (blue line)
l
Button 3 controls the curtain rail in the third window (yellow line)
l
Button 4 controls the curtain rail in the right window (green line)
The curtain in each of the 4 windows can be drawn with the belonging buttons. Each
curtain rail can be individually programmed.
USE OF ODSIF REMOTE CONTROL
