I n s t a l l a t i o n I n s t r u c t i o n s
Please read these instructions thoroughly before installing your Solar Flair™ Tubular Skylight.
Pay particular attention to the assembly diagrams, assembly order, and part names.
(not all items shown are to scale)
FOR INSTALLATION ON AN ASPHALT ROOF
For cathedral ceiling (12” or less) & long shaft installations (6’ or more) see Page 7.
Qty
Part Description
(1)
Solar Lens™ Dome
(1)
Roof flashing
(2)
Adjustable tubes
(1)
Extension tube (20”)
(4)
Ceiling anchors
(1)
Ceiling trim ring with
screw caps
(1)
Flat ceiling diffuser
(1)
Tube of roof sealant
Qty
Part Description
(4)
Dome washers
(4)
Dome screws – 3/4"
(1)
Dome gasket – black
(8)
Flashing screws – 2"
(6)
Flashing washers
(1)
Tube ring seal – white
(4)
Drywall screws (black)
(1)
Roll of foil tape
(1)
Hole cutting template
optional components:
SOLD SEPARATELY
ODL ITEM#
Extension tube (20”) as shown above
EZ14T20
Extension tube (48”)
EZ14T48
Prismatic ceiling diffuser
EZ14CD
White ceiling diffuser
EZ14WD
Electric light kit
EZELK
Safety Glasses
Work Gloves
Pencil
Tape Measure
Plumb Line
Utility Knife
Phillips Screwdriver
Tin Snips
Caulking Gun
Claw Hammer
Flat Pry Bar
Power Drill
Reciprocating/Sabre Saw
Keyhole/Drywall Saw
tools required:
standard kit parts list:
hardware pack items:
14" Tubular Skylight
