02
03
Tools List
Tips
1. Please make sure that all bolts and screws have been tightened
properly before actually using the chair. Check all levers, adjustknobs
and buttons before everyday use.
P.S: If the cylinder doesn't match the seat plate appropriately, the
height adjuster may stop functioning.
2. Please inspect the chair twice a year. Daily use can wear down the
screws and bolts, so regular inspections are important in order to keep
you safe.
3. No standing on the chair.
4. Please do not press the height adjuster down while adjusting, you
only have to lift it slightly to raise or lower the seat. Hard pushing
might break the adjuster.
5. If you are giving this chair to a third person/party, please attach this
manual with the chair.
6. Installation tips: follow the instructions carefully. Please do not
tighten the screws until all screws are lined up at once. This helps you
make changes easier if some steps go wrong. Over-tightening one
screw can make other screws hard to tighten.
7. Please tighten all screws again after the set-up process is complete.
A
x5
Casters
B
x1
Base
C
x1
Cylinder
D
x1
Backrest
E
x1
Seat
F
x2
Armrests
G
x1
Cover
H
x3
Bolts
M10*40mm
L
x2
Bolts
M6*12mm
M
x1
Allen Wrench
N
x1
Allen Wrench
I
x3
Nuts
J
x3
Bolts
M10*16mm
K
x5
Lock Washers
M10*19mm
* Each type of bolt and washer has one extra as a spare.
