Odin TeleSystems BALDER-8S Скачать руководство пользователя страница 2

This document is published by:

Odin TeleSystems Inc.

Printed in U. S. A.

Odin TeleSystems Inc.

P. O. Box 59686

Dallas, Texas 75229 

U. S. A.

Copyright

Copyright (C) Odin TeleSystems Inc. 1997. All rights reserved. No part of this publication may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying,
recording or otherwise, without the prior written consent of Odin TeleSystems Inc., P. O. Box 59686, Dallas,
Texas, 75229, U. S. A.

Trademarks

Odin TeleSystems, the Odin Logo, and Balder-8S are trademarks of Odin TeleSystems Inc., which may be regis-
tered in some jurisdictions. Other trademarks are the property of their respective companies.

Changes

The material in this document is for information only and is subject to change without notice. While reasonable
efforts have been made in the preparation of this document to assure its accuracy, Odin TeleSystems Inc.,
assumes no liability resulting from errors or omissions in this document, or from the use of the information con-
tained herein.

Odin TeleSystems Inc. reserves the right to make changes in the product design without reservation and notifica-
tion to its users.

Notices

UNDER NO CIRCUMSTANCE SHALL ODIN TELESYSTEMS INC., ITS OFFICERS, EMPLOYEES, OR
AGENTS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES (INCLUD-
ING DAMAGES FOR LOSS OF BUSINESS, PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS
INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS PRODUCT AND ITS DOCU-
MENTATION, EVEN IF ODIN TELESYSTEMS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. IN NO EVENT WILL ODIN TELESYSTEMS’ LIABILITY FOR ANY REASON EXCEED THE
ACTUAL PRICE PAID FOR THE PRODUCT AND ITS DOCUMENTATION.  SOME JURISDICTIONS DO
NOT ALLOW THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL AND CONSE-
QUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY.

Содержание BALDER-8S
















Отзывы: