OPERATION
- 35 -
New Operator Driving Procedures
1. Read and understand the owner's manual and all warning and
instruction labels before operating this vehicle.
2. Watch the instructional video with the supervising adult.
3. Review the section of this owner's manual about starting the engine
stopping the engine, braking and parking (pages 33-34).
4. Perform the pre-ride inspection (page 31).
5. Wear appropriate riding gear, including an approved helmet and
protection (goggles or face shield).
6. Select a level open area to practice driving. Make sure you have
adult supervision and permission to drive in this area.
7. Sit in the driver's seat and fasten the seat belt.
8. Do not operate or ride in this
vehicle if the clearance between
the top of your helmet and the
overhead cab frame is less than
2 inches (5 cm).
Minimum
2 inches
(5cm)