Odeca LA715, Руководство пользователя

Страница: 7 / 18

LA715
6 User ManualP2640300
4.3 INTEST: Receipt Header setting
It is possible to memorize three header lines that can be used while printing.
It is possible to choose the font; le possible choices are: normal, double height, expanded,
bold.
According to the choice made, the number of available alphanumeric symbols changes: if you
choose the normal font, you have 24 alphanumeric symbols, whereas in the other three cases,
the alphanumeric symbols are just 12.
<SCRIVI> insertion mode for three heading lines. (LINE 1 - LINE 2 – LINE 3)
Settings available for each line:
NONE (if you don’t want to send the variable to the labelling machine) see
parag. 8.7/8.8
NORMAL 24 alphanumeric symbols maximum
GRASS 12 alphanumeric symbols maximum
2 ALT 24 alphanumeric symbols maximum
2 LARG 12 alphanumeric symbols maximum
Each alphanumeric symbol is inserted through the decimal ASCII codification (a
summarizing chart is attached). In order to conclude, confirm the immission of “000”.
Ex. ODECA s.r.l. (079 – enter – 068 – enter - 069 – enter - 067 – enter - 065 – enter -
032 – enter - 115 – enter - 046 – enter - 114 – enter - 046 – enter - 108 – enter - 046 –
enter - 000 - enter
If the chosen printer is different from the labelling machine, the line added as
verify is printed.
<CANCEL> Cancellation of what has been added.
4.4 B-TARA: Tare Block
It is possible to block the tare leeping it active after each operation.
4.5 STP-1 : Serial printing 1 setting
it is possible to set some parameters referred to the printer connected with the serial 1
<MULTIP> : it enables the multiple printing
<ST-BAR> : it enables the printing of the EAN8 barcode on the receipt
<LF-INI>: it sets the empty lines for the beginning of the printing
4.6 STP-2 : Serial printing 2 setting
It is possible to set some parameters referred to the printer connected with the serial 2
<MULTIP> : it enables the multiple printing
<ST-BAR> : it enables the printing of the EAN8 barcode on the receipt EAN8
<LF-INI>: It sets the empty lines for the beginning of the printing
4.7 FISCAL : Fiscal Memory reading
it is possible to find this option only if it has been enabled an optional memory thanks to which
each weight is memorized in a hard memory accessible only on explicit demand.
The capacity of this memory allows to memorize 170000 weights maximum.
Setting the address of the desired location (from 1 to 170000) the data of the weight
contained and the date are shown.
If the location is still empty, the message “No-FIS” is shown, whereas, if there is a weight, first
the date is shown and then saved weight value.