OCZ Deneva 2, Руководство пользователя

Страница: 4 / 8

2 © 2014 OCZ Storage Solutions, Inc. - A Toshiba Group Company
Installation as a Boot Device
To set up the Deneva 2 as a boot device, you:
1 Install the hardware .
2 Install the operating system on the Deneva 2 .
3 Set the Deneva 2 as a boot device .
The following instructions are a general guideline for installation in Windows 7; it is assumed that you
have access to the system user guide for full instructions. To install in other Microsoft operating
systems or Linux, see the relevant operating system guides.
Install the hardware
1 Install the Deneva 2 into the drive bay.
2 If the motherboard is not SATA compatible, install the SATA HBA card into the system. For full
instructions, consult the SATA HBA card user guide.
3 Connect one end of the SATA cable to the Deneva 2 and the other end to the SATA connector on
the SATA compatible motherboard or SATA HBA card.
4 Connect the power cable from the power supply to the Deneva 2.
Install the operating system on the Deneva 2
1 Check in the motherboard or the SATA HBA card user guide whether any driver is needed during
the Windows installation. Download drivers to a CD or memory stick.
2 Set the boot order in the system BIOS to boot from the Windows installation CD in the CD drive.
For detailed instructions on how to access the BIOS and modify its settings, see the system user
guide.
3 Boot from the CD and follow the onscreen Windows installation instructions.
4 On the Where do you want to install Windows? window, if the Deneva 2 is listed, select it and
click Next .
lf the Deneva 2 is not listed, install the driver from step 1: click Load Driver and load it from the
CD or memory stick. Once the driver is loaded, the Deneva 2 is listed. Select it and click Next .
5 Follow the remaining onscreen instructions to complete the installation.
Set the Deneva 2 as a boot device
To set the Deneva 2 as a boot device, you must change the boot order in the motherboard BIOS. For
full instructions on how to access the BIOS and modify its settings, see the system user guide.
Set the Deneva 2 to the primary boot device. Ensure that you save the settings before exiting the
BIOS.