OCZ Cryo-Z, Руководство по установке

Страница: 13 / 17

FOAM PIECE A-3
A-3
1.5”
1.5”
FOAM PIECE B:
(Thickest Piece)
B
2.5”
2.5”
12
OCZ Technology Group
Manual
RETENTION
BRACKET
PLASTIC COLLAR
COPPER HEAD
1.5”
2.5”
Cut a 1.5 “- diameter circular hole in the center of the foam (A-3).
Tip: draw diagonal lines to connect the previously drilled screw-holes, this will give you
the exact center of the circular cut-out. This piece of foam will fit exactly over the nozzle
of the Cryo-Z’s copper head. Slide the foam past the retention ring on the nozzle.
Cut a 2.5”-diameter circular hole in the center of the thick foam piece (B). The center can
be determined as described above by diagonally connecting the screw holes. This piece
of foam will slide over the thick portion of the plastic collar.
Note: The circular holes should have a very tight fit for both pieces (A-3) and (B).