10 Measuring Procedure
18 / 29
Instruction Manual Pentacam® / Pentacam HR® (G/70700/0109/en)
Fig. 10-5: Adjustment window
When you have achieved a sufficiently accurate position, a black cross will appear in
the centre of the ring, surrounded by four black lines. The Pentacam will automati-
cally begin measuring, alternately you can start the measuring procedure manually.
Fig. 10-6: Adjustment window once the final position has been reached
Î
For measuring manually: Start measuring by clicking [Start Scan] or by pressing the
return key.
Attention
It may not be possible to carry out a measurement with manual release.
Î
Ask the patient to remove his or her head from the rest.
Î
Check the measurement results by referring to the quality specifications
.
