General Description
19
www.ocularrobotics.com
Ocular Robotics Ltd
3.4
Ethernet
3.4.1
REV25-ST VISION - STABILIZED Unit
The REV25-ST VISION - STABILIZED Unit interfaces with a computer via a standard
Ethernet cable. The REV25-ST Control supports a 100 Megabit connection.
The Ethernet connection is located on the black 2 Axis Motor Controller Board.
Figure 3.6 – RJ45 Ethernet Connection located under the Serial No. label.
3.4.2
REV25-ST VISION - STABILIZED System
The REV25-ST VISION - STABILIZED System interfaces with a computer via a standard
Ethernet cable. The REV25-ST Control supports a 100 Megabit connection.
The REV25-ST VISION - STABILIZED System has two Ethernet connections located on
the side of the enclosure. The left Ethernet connector is for interfacing with the
nominated imaging camera. The right Ethernet connector is for controlling the REV25-
ST VISION - STABILIZED System.
Figure 3.7 – RJ45 Ethernet Connections on the REV25-ST System Enclosure
