OCTO PurePlace Building Pro, Руководство пользователя

Страница: 23 / 31

PUREPLACE BUILDING PRO 23
USER MANUAL
the unit. The Dust Guard should be cleared of any debris every six
months or sooner in areas with higher particulate levels. Maintai-
ning the Dust Guard is simple. The Dust Guard is held in place with
magnets requiring no tools to remove it. Follow the steps below to
quickly perform the maintenance:
1. Flip the power switch to the off position.
2. Unplug the power adapter cord by grasping the barrel plug close
the unit and pull-ing outward. The Dust Guard can not be removed
without first disconnecting the power adapter. For your safety, the
power adapter should remain disconnected until the Dust Guard is
returned to it’s original location.
3. The Dust Guard is held in place using four magnets. By placing one
hand on each side of the Dust Guard and pulling outward, remove
the Dust Guard.
4. Using water or compressed air,
remove any debris from the two
screens.
5. If debris is removed using water
be certain the Dust Guard is com-
pletely dry before placing it back
on the AFL unit to prevent the
possibility of electrical shock.
6. Place the Dust Guard back into it’s original location, reconnect the
power adapter cord and rock the power switch to the high or low
position.