Octave TouchTunes MX-1, Руководство по установке

Страница: 72 / 84

OS2 Upgrade Kit Installation Guide
Activate the Jukebox
Powering on the Jukebox
66
5.1 Powering on the Jukebox
1. Power on the computer.
2. Power on the jukebox. The OpenStage 2 (OS2) splash screen appears showing that the jukebox is starting the
initialization process.
5.2 Configuring the Jukebox
After the jukebox is initialized, the Calibration screen appears.
Configuring the jukebox involves the following steps:
• 5.2.1 Calibrating the Touchscreen
• 5.2.2 Selecting Configuration Settings
• 5.2.3 Selecting Languages
• 5.2.4 Choosing Jukebox Settings
• 5.2.5 Choosing Calling Window and Connection Type
5.2.1 Calibrating the Touchscreen
1. Touch the center of the target that appears on the upper-left of the screen.
2. Touch the center of the target that appears on the lower-right of the screen.
3. Touch the center of the target that appears on the lower-left of the screen.
The Settings screen appears.
5.2.2 Selecting Configuration Settings
On the
Settings
screen, you select the source for settings. Settings include mixer levels, credit rules, the remote ID,
and the other configurable options available from the Operator interface or from the TouchTunes Tempo site ( https:/
/tempo.touchtunes.com ).
WARNING: During these procedures, there can be periods when the jukebox appears to not be
responding. Booting the system with the new hard drive can take up to 10 minutes, and the screen can
be blank for up to 90 seconds during the initialization procedure.
Do not power down or attempt to reboot the jukebox during this procedure, or you risk
corrupting the hard drive and rendering it unusable.
NOTE If there is a corruption in the jukebox’s ID chip or other serious error, the Calibration screen
does not appear and an error message appears instead. For details, see section
5.4.2 Serious
System Error .