3
Replacing a Fusion Monitor
Installing the Replacement Monitor
•
Push down on the latch release (located between the two bill acceptors).
Pushing down on the latch release mechanism
•
Remove the custom enclosure (or barrel enclosure) from the chassis and set it aside for re-installation
later.
7. Make sure the Fusion door is locked.
8. Unlock the Fusion screen and remove the key from its lock.
9. Slide the screen up slightly from its bottom panel and then lift it out.
10. Make sure that the two hinges
in the interior of Fusion pop into the locked position to ensure the screen is
secured in the upright position.
