Octave Systems Inc.
- 13 –
Web Cam
1.
Make sure camera power is off, and then hold the power / mode
button down until a small 'BEEP' is heard and
is displayed.
2.
Plug the Multipod 5 in 1 into your USB port.
NOTE:
WEB CAM mode requires drivers to be installed prior to use to
enable the streaming video capability.
USB Storage
1.
Connect the Multipod 5 in 1 to your computer’s USB port
2.
will be displayed.
NOTE:
For file transfer,
(data out)
will flash when the computer
reads files,
(data in)
will flash when files are being written
to the device.
Caution:
Do not unplug the Multipod 5 in 1 while data transfer is occur-
ring.
Taking a Picture
1.
Press Power/Mode button to turn on your Multipod 5 in 1.
2.
It will ’beep’ once and
will be displayed on the LCM.
3.
To take your picture, keep your Multipod 5 in 1 steady and press
the Snap button to capture and store your pictures.
NOTE:
is the default setting and the resolution is VGA (640x480).
setting is QVGA (320x240) resolution.
Содержание Multipod 5 in 1 USB device
Страница 18: ......
