Octava PRO HD Series, Руководство по установке, Страница: 12 / 16

12
Smart Scan
TM
:
Smart Scan
TM
will automatically switch to the HDMI input source
when the input source is turned on and detected. If no HDMI sources
are detected, then the switch will go into standby mode. The Scan is
ON as default.
Note 1 : Some source devices are by design always ON and not able
to shut off. Smart Scan may not work properly in systems with
multiple sources that are by design always ON.
SCAN Modes
Notes
Mode 01 Smart Scan ON
Mode 02 Smart Scan OFF
Mode 03 Smart Scan OFF and
Discrete ON / OFF for
Remote control ON/OFF button = ON
“AUX” Button = OFF
1 Connect Power to the
switch
2 Press and hold down the HDMI
select AND Toslink Audio Select
Button for 5 seconds until LED
display shows 01, 02 or 03.
3 Repeat:
Press and hold down the HDMI
select AND Toslink Audio Select
Button for 5 seconds until LED
display the MODE you wish to set
to.
4 Repeat:
Press and hold down the HDMI
select AND Toslink Audio Select
Button for 5 seconds until LED
display the MODE you wish to set
to.
5 Done.