Basic Installation : Connecting TX and RX
PRO DSX- RX Installation
1
Connect a PRO DSX
–
RX to Ethernet switch and set the RX ID = 01
Refer to :
“RX ID and IP “
2
Connect the HDMI output to Display 1 of your system
3
Connect a PRO DSX
–
RX to Ethernet switch and set the RX ID = 02
4
Connect the HDMI output to Display 2 of your system
Continue for all PRO DSX-RX needed in your system installation
PRO DSX- TX Installation
5
Connect a PRO DSX
–
TX to Ethernet switch and set the TX CH ID =
01
Refer to :
“TX ID and IP SETUP “
6
Connect the HDMI in to Video source 1 of your system
7
Connect a PRO DSX
–
TX to Ethernet switch and set the TX CH ID =
02
8
Connect the HDMI in to Video source 2 of your system
Continue for all PRO DSX-TX needed in your system installation
Connect the PRO DSX-TX and RX to a recommended Ethernet Switch
per the following procedures:
HDMI Over IP
Installation Manual-PRO DSX
18