Octava HDMX42 PRO HD HOME Theater Series, Руководство по установке

Страница: 12 / 16

12
Changing EDID mode:
It is recommended to keep the EDID in the factory default MODE1. If
necessary, you may set to different EDID mode by following these
instructions.
Step Action Notes
1 Disconnect all sources and
display from Matrix
2 Set switch 1,2,3,4 to down
position as shown
3 Set the EDID to the mode
desired.(MODE 2 shown.) See page 11
for other
EDID modes
4 Reset Power to the Matrix
by disconnecting the
power and reconnecting
power.
5 The LED will now indicate
the EDID Mode that you
will program.(mode 2
shown) 1= mode 1
2= mode 2
3= mode 3
4= mode 4
flashed