4
USER SETTINGS
Warm-Up
Controls 3-minute warm-up:
ON
or OFF
Clock
Direction
Controls clock counting:
UP
or DOWN
Max
Workout
Time
Sets limit for workout time: 1 to 99 minutes (factory-set at
30:00
). Press
Enter
to scroll in
15-minute increments, or enter value using number keypad.
Unit Type
Controls weight and distance display units:
ENGLISH
(pounds and miles) or METRIC
(kilograms and kilometers)
CROSS
CiRCUIT
Activates the CROSS CiRCUIT Pro programs:
ON
or OFF.
Default
Width
Defines default setting for lateral width: 1 to 10 (factory-set at
5
). Press enter to scroll through
values or enter value using number keypad.
900MHz
(800MHz)
Channels
Initiates channel programming; press
Enter
to begin. Press CH
(
)
to select the appropriate
program modes for your facility:
P-1 = MYE Entertainment 900MHz (800MHz) transmitters
P-2 = Cardio Theater LCS 900MHz (800MHz) transmitters
P-3 = Cardio Theater / Enercise x TV 900MHz (800MHz) transmitters
P-4 = BroadcastVision 900MHz (800MHz) transmitters
To automatically scan and program channels:
With the proper transmitter mode displayed, press
Enter
to auto-scan and lock
transmitters. Repeat as needed for each transmitter type.
Press CH
(
)
or CH
(
)
to verify that “PRESET” appears in the display, indicating that all
transmitters have been locked in.
Press
MUTE
to save 900MHz (800MHz) CHANNELS and return to user settings.
To manually program channels
:
With the proper transmitter mode displayed, press
MUTE.
Press CH
(
)
or CH
(
)
to scroll through all transmitter channels.
To add or delete a transmitter channel press
Enter
. NOTE: “PRESET” will appear in the
display when a transmitter channel is programmed.
To exit manual program mode press the MUTE button. The display will blink briefly and
will default to first transmitter channel programmed.
Use the CH
(
)
or CH
(
)
to select another transmitter type (P-1 to P-4) as needed and
repeat these manual steps.
Press
MUTE
to save 900MHZ (800MHZ) CHANNELS and return to user settings.
900MHz
(800MHz)
Near/Far
Sets the reception sensitivity of the 900MHz (800MHz) receiver,
FAR
(for most installations)
or NEAR (when receiver is installed 1-5 feet from a transmitter). Press
Enter
to switch from
one setting to the other. The Message Center displays the revised setting for 5 seconds,
then returns to 900 MHZ (800mhz) NEAR/FAR.
Beep
Controls console sounds:
ON
or OFF.
Brightness
Controls brightness of the console LEDs: 1 (dim) to
8
(bright).
Exit
Press
Enter
to Exit and save settings. Press Pause Clear twice to exit without saving.
Содержание LX8000
Страница 1: ...ASSEMBLY OPERATIONS INSTRUCTIONS LX8000 WIRELESS AUDIO KIT 800MHz or 900MHz...
Страница 7: ...6 N O T E S...
