manualshive.com logo in svg

Octagon 5554, Руководство пользователя

Поделиться
Скачать
Octagon 5554 Скачать руководство пользователя страница 21

Installation – 13

Installing the 5554/5558

Take care to correctly position the 5554/5558 in
the card cage.  The V

CC 

and ground signals must

match those on the backplane.  Figure 2–3 shows
the relative position of the 5554/5558 as it is
installed in the card cage.

1.

Verify the base address settings are correct for your applica-
tion.

2.

Turn the card cage power off.

3.

Position the cage so that the backplane is away from you, the
power module is to the right, and the open side of the cage is
closest to you.  The lettering on the backplane should be right
side up (for example, you should be able to read “A31” on the
backplane), with the words “OCTAGON SYSTEMS CORP.”
running vertically along the left side of the backplane.  This
position is “feet down” for a table mount cage and “feet back”
for a rear mount.

4.

Slide the 5554/5558 into the card cage.  The components on the
card should face to the left.  The lettering on the card (“Octa-
gon Systems Corp.”) should be on the top edge of the card and
the gold contact fingers toward the backplane.

A31

B31

Card Edge Pins 
A31 & B31

Card Edge Pins 
A1 & B1

Micro-PC 
Motherboard

A1

B1

5554/5558 

Quad/Octal 

Serial Card

Figure 2–3—Card Edge Orientation

WARNING:

Содержание 5554





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды