3. Use
the
▲
or
▼
buttons to highlight the signal type and press
◄
or
►
to select your
connection either AIR or CABLE
.
4. Use
the
▲
or
▼
buttons to select AUTO CHANNEL SEARCH and press
ENTER
to scan
for channels
.
5.
Once the scanning finishes, you can begin to watch
HDTV
.
If You’ve Connected set-top boxes to the HDTV…
1.
Press the S button on top of the HDTV or the SOURCE button on the remote control
and you will see the picture above.
2. Use
▲▼
buttons to select the source you want to switch to and press the
ENTER
button in the middle of the
▲▼
buttons.
Please Note :
•
Not all broadcasts are in High Definition (HD). Please refer to your local
broadcasting stations for more information.
•
The HDTV’s tuner is designed for HDTV therefore requires a stronger
signal than normal TVs. If you cannot achieve that signal level with
your antenna or cable, your HDTV might lose picture or sound.
•
HDMI 3 also doubles as a MHL enabled port, so if you have a cell phone that
supports the Mobile High-definition Link, you can purchase a MHL cable and
connect it to HDMI 3.
