oConnor O-Box WM Set, Руководство пользователя

Страница: 2 / 26

WARNING!
If the sunshade is damaged or torn, DO NOT touch the damaged
surfaces. Dispose of safely.
Ÿ
DO NOT attempt to move the camera by pulling the flags.
Ÿ
DO NOT lift the O-Box WM by the flags, the flag brackets or the O-Grips.
Ÿ
DO NOT overload the O-Box WM as a carrying or rigging point.
Ÿ
Ensure the lock levers on the flag brackets and the 3-system rod bridge
are firmly tightened.
Ÿ
Ensure screws are sufficiently tight when attaching rod brackets or studio
adapter brackets.
Ÿ
NEVER use solvents or oil-based cleaners to clean the O-Box WM.
Use mild detergents only. Wipe surfaces with a damp, lint-free cloth.
Ÿ
ALWAYS use genuine OConnor parts and accessories with the O-Box WM.
Ÿ
When using the O-Box WM as a clamp-on mattebox and/or handheld mount,
DO NOT subject the lens to forces that may damage it.
Particular care should be taken when using still photography lenses intended
for autofocus photography.
!
Copyright © 2013 The Vitec Group plc
All rights reserved throughout the world. No part of this document may be stored in a retrieval system, transmitted, copied or reproduced in any way, including,
but not limited to, photocopy, photograph, magnetic or other record without the prior agreement and permission in writing from the Vitec Group plc.
Caution
!