EN
20
PROGRAMMING THE MAIN PARAMETERS
Programming is usually performed in-house. To access this programme for controls or modifications a password
must be requested to our after-sales service
“USER” STRUCTURE
If the “user” structure is
used, it is possible to enter:
diameter of the roller ,
roller width and number
of teeth of rack
.
TYPE OF STRUCTURE
Press + and - keys to display and choose the type of
structure used.
DATA OF STRUCTURE CHOSEN
It is possible to enter
hose length
,
ovalization
and
hose
diameter.
After switch-on, when Press + is displayed, hold down
Prog
until parameter page is displayed.
It is possible to enter the parameter environment,
even from
status page
.
um
–
Unit of measurement
.
Set 0 to measure in
metres.
Set 1 to measure in
feet.
ton - Time
(sec)
of pulse to piston
. If time is dcreased,
stroke is shorter and closing movement is slower.
toff -
It is
time
(sec)
of pulse-to-pulse pause
.
step -
It is the
number of pulses to be sent to
piston
.
Pt -
Potentiality
.
m2 -
Set
1 for outlet valve
.
Set
0 for closing valve
.
f -
Set 4 to enable the pressure switch
PARAMETER PAGE
Use Prog, + and - keys to set:
um
: unit of measurement.
ton
: time (sec) of piston pulse.
toff
: time (sec) of pulse-to-pulse pause.
step
: number of pulses to output to piston.
Pt
: potentiality.
m2
: set 1 for outlet valve.
set 0 for closing valve.
f
: Set 1 for electric limit switch
Содержание AQUA SYSTEM 3
Страница 5: ......
