Ocilion IPTV Technologies P510 IP, Инструкция по эксплуатации

Страница: 14 / 28

6.2 Changing the signal type
In as-delivered condition, the remote control is in Bluetooth mode. If you want to
change the signal type, proceed as follows:
1. Press and hold down the and buttons simultaneously for at least 3
seconds.
The green LED on the remote control is lit.
2. Enter the desired code (see Table 1).
The green LED on the remote control flashes twice in quick succession.
The selected signal type is now active. You can change the signal type at any time
in the same way. For details of restoring the remote control to the factory settings,
see chapter "Resetting the remote control" on page 18.
Signal type Description Code
Bluetooth (default) Controls the set-top box in Bluetooth mode.
The remote control must be paired with the
set-top box for this.
1
Infrared Controls the set-top box in infrared mode. 2
Table 1: Signal types
6.3 Programming the TV set
The remote control may not be compatible with your TV set.
Note the specifications for the respective programming type. If you deviate
from them or do not press a key for 15 seconds, the programming process
is cancelled. This is shown by the green LED flashing once.
The remote control has an integrated database with TV codes for numerous
brands. Depending on the brand of your TV set, you can a program TV code in
different ways:
■
Manual programming: you need to enter the TV code manually.
■
Brand code search: you can search for the desired TV code within a brand.
■
Automatic code search: you can search the entire TV database for a suitable
TV code.
14 | P510 IP