BA_GMLW OTE bis V3.4 SHORT_EN_20090408_V1
Page 4 of 25
1 Notes on the documentation
The following pointers are valid for the whole of
the documentation.
Storage:
This
instruction Manual
must be kept within
easy access close to the heat pump.
Symbols:
The precautionary pointers below will be used
in this document..
WARNING
Pointer which, if not heeded, can mean danger
to life and limb, and can also lead to material
damage. These pointers must be heeded with-
out fail.
CAUTION
Pointer which, if not heeded, can lead to an
appliance malfunction and to material damage
(to system components, building, ...). These
pointers must be heeded.
Tips which are intended to aid the job in hand,
or mean additional information for the user.
2 Safety
instructions
Read this manual carefully before you begin to
commission/adjust the heat pump!
Converting or altering the appli-
ance is not allowed. Work on the
appliance (repairs, alterations) may
only be carried out by the manufac-
turer or by a specialist authorised
by the manufacturer.
All circuit breakers in the heating
system are to be turned off before
any work is carried out on the
terminal strips or electrical con-
nections (wiring). The heating
system comprises the control, the
additional modules and the com-
ponents connected to the control
(energy generator, pumps, non-
self-resetting safety thermostat,
etc.).
Contact with the terminal strips,
wires connected to them, or non-
connected wires by persons or by
means of electrically conductive
materials is prohibited, as the
terminal strips could be live (dan-
ger of contact with live circuit).
The control, additional modules,
terminal strips and control wiring
may also be being supplied with
live voltage by means of external
switching (non-self-resetting
safety equipment, etc) when the
control is not connected, or no
line voltage is on the control
The
commissioning
as well as the
maintenance
of the appliances may
only be carried out by personnel
which are authorised by OCHSNER
.
The installation of the appliances
and their
electrical wiring
may only
be carried out by a specialist accord-
ing to local regulations and codes of
practice.
POINTER
