Document UT-MT-0837_EN
Page 5 of 29
Issue 16/10/2015
LETG - LED ELEVATED RUNWAY GUARD LIGHT
PRODUCT WARRANTY TERMS AND CONDITIONS
THIS WARRANTY IS THE SOLE WARRANTY MADE BY THE MANUFACTURER AND REPLACES ANY OTHER
WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT BY WAY OF LIMITATION, ANY
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
OCEM - ENERGY TECHNOLOGY warrants to the direct purchaser of the products manufactured by the
Company that such products are free from defects in material at the time of delivery to the Purchaser,
provided that no warranty is made with respect to:
(a) any products that, in the Company's judgement, have been repaired or modified in such a manner as
to damage them;
(b) any products that, in the Company's judgement, have been exposed to negligence or adverse
conditions or stored improperly;
(c) any products that were not operated or serviced in accordance with normal practice and with the
recommendations and specifications issued by the Company;
(d) broken warranty seals, if any, will immediately void the warranty.
The Manufacturer's obligations under this warranty are limited to using reasonable efforts to repair, or
alternatively, replace during regular working hours those products that in the Manufacturer's judgement
proved not be as warranted within the applicable warranty period.
All costs of transportation of any claimed, repaired or replaced products to or from the Company's facility
shall be borne by the Purchaser.
The Company may demand that the claimed product be delivered to its facility at the Purchaser's expense
in order to establish whether the claim is covered by warranty.
The installation costs for a repaired or replacement product shall be borne by the Purchaser. Replacement
parts provided under this warranty are covered for the remainder of the warranty period as if they were
original equipment parts. This warranty does not cover downtime; the Company disclaims all liabilities for
damages caused by any delays in connection with warranty service.
PLEASE READ THIS DOCUMENT CAREFULLY
Please read the entire document carefully before installing, commissioning, operating, servicing or
disposing of the equipment.
SAFETY INFORMATION
Use great care when working with this equipment. It is normally used in connection with or connected to
circuits operating at dangerous voltage levels and can be fatal.
The following section contains important information on the safety rules that must be observed when
installing and operating the equipment.
Improper use of the equipment or lack of care in applying the safety procedures and instructions provided
in this document may create a hazard. Avoid contact with voltage or current sources.
Do not remove the protections or safety devices for any reason whatsoever.
