Starting the gateway
OCEABridge User Guide
Page 15
User guide
3.
Plug the other end of the cable into your computer.
The WAN Ethernet connector is configured as a DHCP client by default.
If your network has a DHCP server, you may plug in a second Ethernet
cable to the WAN port and connect the other end to your network in order
to access OCEACloud immediately.
Attention: The subnet LAN interface address is 192.168.1.0/24. If your
network is also set to use 192.168.1.0/24, do not plug the WAN Ethernet
cable into OCEABridge while you are setting up the device via the LAN
connection.
2.3
Connecting to the configuration application
OCEABridge is delivered with a fixed IP address. To access the
configuration interface, the computer you are using for the connection will
automatically obtain an IP address via DHCP. That address will be within
same address range as that used by OCEABridge.
1.
On your computer, use a web browser to access this address:
Figure 8 – Connecting to the OCEABridge configuration interface
2.
Enter the default user name and password:
o
Username:
root
o
Password:
root
