Oceasoft Emerald, Руководство пользователя, Страница: 15 / 20

Using your Emerald module
OCEASOFT Emerald User Guide Page 15
3.2.1 Using the LED to check module status
The color LED on the front of the Emerald module indicates module status. The LED on
Emerald modules is activated by passing the magnet in front of the module, offering
different patterns based on status, as shown below:
General (

= short flash)
Bluetooth is activated for 1 minute if
the module is in one of these states:
a) Flight Mode
b) Battery Low
  
(blinks blue once every 10 seconds for 1 minute)
Module currently connected via
Bluetooth
     
(blinks blue twice every 6 seconds for one minute)
Mission status (

= short flash,

fixed for 3 seconds)
No mission
programmed
Mission
programmed
and waiting to
start
Mission
started
Mission
stopped
Everything OK
           

     
Alarm in progress n/a n/a

     
Alarm occurred n/a n/a
           
This same behavior is obtained using the OCEAView mobile application, with the Blink LED
to identify module function, as described in the OCEAView User Guide.