manualshive.com logo in svg

OceanSat AIS, Руководство пользователя

Поделиться
Скачать
OceanSat AIS Скачать руководство пользователя страница 28

Operation

Page 28

3.16.4 Installation menu

The installation menu provides access to settings that are required during installation of the Oceansat
transceiver. Please refer to the installation section of this manual for more detailed information on installation 
settings and requirements. Some settings in the installation menu are password protected and should only be 
adjusted by authorised personnel. 

Figure 27 The installation menu

The available settings and options are:

●

Set identification - entry of vessel identification information including MMSI number, name, call sign, 
vessel type and IMO number. This menu is password protected.

●

Dimensions - entry of vessel dimensions and location of internal and external GNSS antennas. This 
menu is password protected.

●

Change password - entry of a new password to protect installation settings. This menu is password 
protected.

●

Regional areas - through this menu option the user can list, edit and add regional area definitions. 
See section 4.8. This menu is password protected.

●

Sensor configuration - this sub menu allows the communication speed of the three sensor data input 
ports. See section 4.4.3. This menu is password protected.

●

Inland AIS Settings - see section 3.17.

3.16.5 Maintenance menu

The maintenance menu provides access to Oceansat system information and operating diagnostics. These 
features are intended for use by authorised installers and service agents only. Access to some maintenance 
features are protected by the password.

Figure 28 The maintenance menu

The available settings and options are:

●

System information - selecting this item will display internal configuration information. 

●

Diagnostics - selecting this item will display internal diagnostic information. See section 3.16.6. 

●

Sensor status - will display the status of external sensors.

13:20:47

INSTALL ATION:

SET IDENTIFICATION

DIMENSIONS
CHANGE PASSWORD
REGIONAL AREAS
SENSOR CONFIGURATION
INLAND AIS

OK

GPS

INT

Back

S elec t

13:20:47

MAINTENANCE:

OK

GPS

INT

Back

S elec t

SYSTEM INFORMATION

DIAGNOSTICS
SENSOR STATUS

Содержание AIS






















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды