background image

 

 
 
 
Dear Customer, 
We from Shenzhen Ocean power food technology Co., ltd. would like to send you our 
sincerely wishes and thanks for purchasing one of our soft ice cream machines. 
 
To be able provide our customers with the best possible service we added ISO 9000 and 
ISO 14000 into our own quality and environmental system since 2000-07-11. 
 
 
 
 
 
 
 
 
In addition to the norms from the ISO we also seriously follows the directives of CB and 
CQC for the manufacturing of this machine. 
 
 
 
 
 
 
 
 
 
 
 
 
Shenzhen Oceanpower food technology co., ltd. 

Add: Block C & D, 7 & 8/F, Bldg F3.8,  Tian’an  CyberPark,  
Chegongmiao, Futian District, Shenzhen, China 

Post: 518040 

Tel: +86-755-83300666 (100 Lines) ext 8908 
Direct nr: +86 755 838 769 86 

 

Fax: +86-755-83300726/727/728 

http://www.oceanpower.com 
http://www.chinafoodol.com 

 
 
Oceanpower carries out a continuing research, toward further development and 
improvement; therefore, the information found in the manual is subject to change without 
further notice. 
All technical data, pictures and drawings contained in this manual are not binding on the 
manufacturer, nor can the manufacturer be held liable for any modifications to the 
machine in whole or in part. 

 

1

Содержание OPF138






























Отзывы: