EYES
HD GEN2
2020 INSTALL & OPERATION MANUAL
5
3
Installation
3.1 INSTALLING THE CAMERA
Camera Body
Washer
Locking Nut
Additional Items required:
•
Marine sealant
– 3M 4200 or equivalent.
•
41mm open-ended spanner.
•
Wire strippers / cutters / crimp tools etc for making electrical connections.
•
OceanLED recommends the use the optional OceanLED IP68 Eyes camera connector enclosure (p/n 019908)
to enclose the camera connections. If this is not used, then a suitable waterproof junction box, or method of
fully waterproofing the connections will be required.
•
Suitable cable for supply connection.
•
Suitable cable / crimps for connection of the vessels sacrificial bonding system to the camera body.
•
Fuse & fuse holder to fuse supply if not fused already.
•
Cable ties.
•
Waterproof connectors/glue lined heatshrink for power connections.
•
Optional HD-SDI to HDMI converter to convert the HD-SDI output from the camera to HDMI format.
(OceanLED p/n: 11809).
•
Suitable video monitor / display unit.
Optional Eyes IP68 Camera Connector Enclosure (p/n 019908)
OceanLED recommends dry fitting all products. When installing, be sure that the camera fits the area and
secures to the hull using the appropriate hardware before applying any sealant.
Kit Includes
