Oceanic VT 4.0, Руководство по эксплуатации

Страница: 6 / 60

6
VT 4.0 OPERATING MANUAL
© 2002 Design, 2011 Doc. No. 12-5213-r02 (9/6/11)
INTERACTIVE CONTROL CONSOLE
The Interactive Control Console utilizes 3 control buttons that are referred to as M, A, and S.
• M (left front) - Menu, Mode, Minus (decrease)
• A (right front) - Advance, Add (increase).
• S (right side) - Select, Save.
ACTIVATION
To activate the VT 4.0, press/release any button.
• The unit will enter Diagnostic Mode displaying all segments of the LCD as 8's, followed by dashes ( - - ), then a countdown
from 9 to 0. It checks the display and voltage to ensure that everything is within tolerance.
• It will also check ambient barometric pressure, and calibrate present depth as 0. When at 3001 feet (916 meters), or
higher, it will adjust depth for the higher altitude.
• After the Diagnostic check, a MY INFO screen will be displayed for 10 sec showing a default message, or information that
you enter using the PC interface system.
• The NORM Surface Main screen will then be displayed, allowing access to all surface functions.
• If no dive is made within 2 hours, the unit will shut Off. Also see PSM on page 9.
Contacts located on the stems of the buttons and pins of the PC Data Port will automatically activate the unit and cause it
to enter dive mode when the contacts become wet and it senses depth of 5 FT (1.5 M). They will not inadvertently activate
Surface Mode such as when in a wet gear bag.
MENU SYSTEM
The Dot Matrix located in the middle of the LCD viewing area is used to display alpha numeric messages and measured values
as well as Menu type systems for selection of settings and various auxiliary functions. It also serves as the Digital Compass which
can be accessed while viewing Main screens.
There are multiple Menus such as -
• NORM Main Menu
• GAUG Main Menu
• FREE Main Menu
• Compass Menu
• Compass Reference Menu
• Set FO2 Menu
• Set Alarms Menu
• Set Utilities Menu
• Set Time Menu
• Set Shortcut Menu
• Set Dive Display Menu
• Set Preview Menu
• Gas/Transmitter Switch Menu
Upon entering a Menu, movement through it starts at the first (top) selection, then continues in a rolling manner down the screen
showing selections in groups of up to 4 items.
Menu button operations >>
M (< 2 sec) - to access Menu.
A (< 2 sec) - to step down the screen (forward) through Menu selections.
M (< 2 sec) - to step up the screen (backward) through Menu selections.
S (< 2 sec) - to access the item indicated by Arrow icon ( > ).
S (2 sec) - to step back to a previous item or from a selected item to the Menu.
S (2 sec) - to step back from a Main Menu to a Surface Main.
M (2 sec) anytime, or no button action for 2 minutes - will revert to Surface Main.
• Right Arrow icon ( > ) at the left indicates that the item can be selected.
• Down Arrow icon ( v ) at the right indicates that additional items are available below (after) those shown.
• Up Arrow icon ( ^ ) at the right indicates that additional items are available above (before) those shown.
OVERVIEW
M
A
S
Default Message
(for 10 sec, then SURF Main)
Diagnostic Check
(for 3 sec, then My Info)
FREE.SURF
MAIN.MENU
SELECT
>
CDT
SET.MENU
OP.MODE
Sample Menu
This item can
be selected
(accessed).
There are more
items above.
There are more
items below.
M A
S