Oceanic VEO 100, Руководство по эксплуатации

Страница: 16 / 60

16
ACTIVATION
To Activate the Veo 100 - press and release the Button.
• Upon manual activation, the unit will enter Diagnostic Mode
(Fig. 7), displaying all segments of the LCD as 8's, followed
by dashes (- -), then a countdown from 9 to 0.
• Diagnostic Mode checks the display and battery voltage to
ensure that everything is within tolerance and functioning
properly.
• It will also check the ambient barometric pressure, and
calibrate its present depth as zero. At elevations of 2,000
feet (610 meters) or higher, it will adjust its depth readings
and no decompression limits for that elevation.
WARNING: If it is manually activated at elevations
higher than 14,000 feet (4,270 meters), it will perform a
diagnostic check followed by immediate shutdown.
Identification of the Computer Module
To view a screen that displays the unit's serial number and
firmware revision level, hold the button depressed as the Diagnos-
tic countdown reaches 00. The Serial Number screen appears
(Fig. 8). Upon releasing the button, the unit shuts Off. Press the
button again to reactivate the unit.
Fig. 7 - Diagnostic Mode
Fig. 8 - Serial Number