Oceanic OCS, Руководство по эксплуатации

Страница: 44 / 62

44
OCS OPERATING MANUAL
© 2002 Design, 2011 Doc. No. 12-5272-r01 (9/28/11)
FREE MENU
M (< 2 sec) - to access Menu, while viewing Surface Main.
A (< 2 sec) - to step down (forward) through selections.
M (< 2 sec) - to step up (backward) through selections.
S (< 2 sec) - to access selection indicated by Arrow icon ( > ).
M (2 sec), any time while in the Menu system - to revert to Surface Main.
S (2 sec), while viewing the Menu - to revert to Surface Main.
2 min (no button action) - will revert to Surface Main.
CDT (Countdown Timer) STATUS , information includes (Fig. 127A) -
> Graphics CD TMR solid with OFF (or ON) flashing.
> Countdown Time (hr:min). If OFF, 0:00 or the CDT time if previously set. If ON, the remaining time (min:sec).
• A (< 2 sec) - to step through selections OFF, ON, and SET.
• S (< 2 sec) - to save the selection that is flashing.
• S (2 sec) - to revert to FREE Menu.
>> If OFF is selected, operation reverts to the Menu.
>> If ON (start) is selected, operation reverts to the Menu with the time set starting to countdown.
>> If SET is selected (Fig. 127B), Set CDT is accessed.
Set CDT, information includes (Fig. 128):
> Graphics SEt and CD TMR.
> CDT (min:sec) with Minutes digits flashing.
> Time (clock) icon.
• A (hold) - to scroll upward through Minute Set Points at a rate of 8 per second from 0: to 59: in increments of 1: (min).
• A (< 2 sec) - to step upward through Set Points one at a time.
• M (< 2 sec) - to step back through Set Points one at a time.
• S (< 2 sec) - to save the Minute Set Point and flash the Seconds digits.
• A (hold) - to scroll upward through Seconds Set Points at a rate of 8 per second from :00 to :59 in increments of :01 (sec).
• A (< 2 sec) - to step upward through Set Points one at a time
• M (< 2 sec) - to step back through Set Points one at a time.
• S (< 2 sec) - to save the CDT Set Point and revert to the CDT Status screen with SET flashing (similar to Fig. 127B).
• S (2 sec) - to revert to FREE Menu.
The CDT will run in the background, while on the surface and during dives, until it counts down to 0:00, or it is turned OFF.
When a set Countdown Time reaches 0:00, the Audible Alarm will sound during which time the graphic CDT will be displayed
with 0:00 flashing on the Surface or Dive Main (Fig. 129).
EDT ALARM
Factory set for a fixed 30 seconds, the EDT (Elapsed Dive Time) alarm sounds the Audible every 30 seconds while underwater in
FREE Dive Mode.
Set EDT Alarm, information includes (Fig. 130):
> Graphic EDT.
> Graphic OFF (or ON) flashing.
• A (< 2 sec) - to toggle OFF/ON.
• S (< 2 sec) - to save Set Point and revert to FREE Menu.
• S (2 sec) - to revert to FREE Menu.
DD ALARMS
There are 3 Descending Depth (DD) alarms that can be set at progressively deeper depths. DD2 values deeper than DD1, DD3
values deeper than DD2.
Set DD1 Alarm, information includes (Fig. 131):
> Depth value with FT (or M) and MAX icons.
> Graphics DD1 AL.
> Graphic OFF (or ON) flashing.
• A (< 2 sec) - to toggle OFF/ON
• S (< 2 sec) - to save Set Point and flash Depth digits (if ON); or revert to FREE Menu (if OFF), bypassing DD2 and DD3.
• A (hold) - to scroll upward through Depth values at a rate of 8 per second from 30 to 330 FT (10 to 100 M) in increments of
10 FT (1 M)
• A (< 2 sec) - to step upward through Set Points one at a time.
• M (< 2 sec) - to step back through Set Points one at a time.
• S (< 2 sec) - to save the setting and revert to the FREE Menu.
• S (2 sec) - to revert to FREE Menu.
Fig. 127B - CDT STATUS
(to access Set, or set/ready)
Fig. 127A - CDT STATUS
(upon access)
Fig. 128 - SET CDT
(min:sec)
Fig. 129 - SURFACE MAIN
(during CDT alarm)
Fig. 130 - SET FREE EDT AL
Fig. 131 - SET FREE DD1 AL