Oceanic OCEACLIM140W1, Руководство пользователя

Страница: 65 / 73

65
If the water tank is full , the corresponding LED is turned on and an alarm sounds.
When the tank is full, please drain
(For that, please refer to the section "Cleaning and maintenance").
FAN MODE
Press the "MODE" button until the LED FAN lights
Air flows into the room without being cooled. The temperature can not be adjusted.
Adjust the fan speed by pressing the button
High : Medium : Low :
- It is not necessary to connect the drain hose to the window.
HEATING MODE
- Press the MODE button to select the HEAT mode .
The corresponding indicator lights on the control panel.
- Use the buttons and the control panel or the remote control to set the desired target
temperature.
- The heating mode can only work if the ambient temperature is lower than the target
temperature.
- In HEATING mode, install the exhaust hose in order to exhaust the cold air outside.
- Heating mode works if the ambient temperature is between 7 ° C and 25 ° C.
- After using the heating mode, remember to drain the unit.
5.
TIMER FUNCTION:
- Allows to program a timer off of the air conditioner
When the appliance operates in mode COOLING, DEHUMIDITY, FAN, HEATING press
the MINUT button (TIMER) on the control panel or remote control to activate this feature.
The corresponding LED will light.
- Press the button as well as increase and decrease to select the
number of hours that you want the device works before stopping automatically.
You can select a time between 1 hour and 24 hours. The unit will stop automatically at
the end of this period. If this function is not selected, the unit will operate continuously.