Oceanic HT10PX1, Инструкция пользователя

Страница: 27 / 48

Page 25 of 42
•
If the power cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
•
The heater must not be located immediately
below a socket-outlet.
•
WARNINGS
：
In order to avoid
overheating, do not cover the heater.
•
The device must be powered by a Residual
Current Device (RCD) with a rated operating
differential current of not more than 30 mA.
•
Warning: if this appliance is installed in a
bathroom, it must be installed at least 60 cm from
a bath or shower (volume 2), in accordance with
the requirements of the French electrical
installation standard NFC 15 -100.
•
The device must be connected to a circuit
independent electric protected by a bipolar circuit
breaker according to the standard electrical
installation NF C 15-100.
•
Means for disconnection from the supply mains
having a contact separation in all poles must be
incorporated in the fixed wiring in accordance
with the wiring rules.
•
With respect to the details of how to install the
appliance onto the wall, refer to the
"INSTALLATION" section.
•
Regarding the detailed information on the
connection of the electric cable, refer to the
section "ELECTRICAL CONNECTION".