Oceanic Datamax Pro Plus Скачать руководство пользователя страница 86

Страница: 86 / 100

WARNINGS and SAFETY RECOMMENDATIONS

• Never, under any circumstances, poke any object through any slots or holes of the Pro Plus.

Doing so may damage the depth sensor, possibly resulting in erroneous depth and/or dive
time remaining displays.

• If you are in doubt about the accuracy of your Pro Plus depth readings, DO NOT attempt to

dive with it until it has been inspected by Oceanic Customer Service.

• Never pressure test the Pro Plus in an air environment. Doing so may damage the depth

sensor; possibly resulting in erroneous depth or time readings.

• Never spray aerosols of any kind on, or near, the Pro Plus. The propellants may chemically

attack the plastic.

• When the Low Battery icon is displayed prior to a dive, DO NOT attempt to dive with the

Pro Plus until the battery is replaced.

Содержание Datamax Pro Plus





































































































Результаты поиска

Содержание Datamax Pro Plus

Отзывы:

Бренды по названию

Популярные бренды

Oceanic Datamax Pro Plus, Руководство пользователя

Результаты поиска

Содержание Datamax Pro Plus

Отзывы:

Бренды по названию

Популярные бренды