Oceanic Data Mask Скачать руководство пользователя страница 62

Страница: 62 / 148

NOR/GAU LOG MODE

LOG MODE displays information from the latest 24 NOR/GAU dives sequentially in

reverse order (the most recent first).

Dives will be numbered 1 to 24 starting at #1 each time a new series of dives begins.

After it shuts Off 24 hours after a dive, the first dive of the next new series will be #1.

LOG information is retained until deleted by another dive.

> After exceeding 24 dives, the most recent Dive completed will be added to the LOG

and the oldest deleted.

Battery removal will not affect the data stored in the LOG for viewing.

Accessing LOG Mode:

Access to Log Mode is dependent upon diving activity previously conducted.

While operating in Log Mode, presses of the S (Side) button will not toggle the Backlight.

During the first 10 minutes after a dive, pressing and releasing the A (Top) button

momentarily (< 2 seconds) while the NOR SURF MAIN screen is displayed will

access LOG MODE. (SURF MAIN > LOG)

10 minutes after a Non Violation Nitrox Dive, pressing and releasing the A (Top)

button 6 times (< 2 seconds each time) while the NOR SURF MAIN screen is

displayed will access LOG MODE (SURF MAIN > ALT 1 > ALT 2 > PLAN > FLY > SAT

> LOG).

Содержание Data Mask





















































































































































Результаты поиска

Содержание Data Mask

Отзывы:

Oceanic Data Mask, Руководство по эксплуатации, Страница: 62 / 148

Результаты поиска

Содержание Data Mask

Отзывы: