Oceanic 0CS30, Руководство пользователя

Страница: 15 / 18

Oceanic Sauna Heater
15
2. Setting time and temperature:
•
The default settings for temperature are: 75
o
C/167
o
F. For preset operation time: 2 hours. These can
be adjusted easily, if the electricity supply is lost the controller will return to default settings.
•
When the sauna is turned on the time settings will work under A model (A model LED is on), the time
window will display the last time that was set. To adjust press the time adjust button “
▲
” or “
▼
”, every
press the time will increase or reduce 10 minutes. When you reach the time want, wait and after 5
seconds the time window will stop flashing, now the setting is confirmed.
•
To set your heater to come on at a certain time (for example: if your watching a film and want the sauna
to start heating up half way through so its ready for the end of the film) you can use the B model setting
which can be set if you press the “Model button” and the time window will display 4.00 minutes, now
press the “time adjust button” (the time will now flash) “ ▲ ” or “ ▼ ” and set the amount of time you want
until the heater will turn on wait five seconds and the display will stop flashing now the time is confirmed
and will start counting down, when it reaches “0” it will switch over to A Model and the heater will turn on.
(Remember to set the time you want the heater on for on A Model before setting B Model)
•
For quick time adjustment: hold the “ ▲ ” or “ ▼ ” and it will count continuously up or down, when it
reaches the time you want release and it will stop. It will confirm after 5 seconds
•
Temperature: by pressing temperature display switch button you can switch between centigrade and
Fahrenheit.
To adjust temperature press “ ▲ ” or “ ▼ ” (the display will flash) now press the temp adjust button “ ▲ ” or
“ ▼ ”, each press the temperature will increase or reduce 1
o
C or 2
o
F. When you reach the temperature
you want wait for 5 seconds and the temp will stop flashing which means its confirmed.
For quick temperature adjustment: hold the “ ▲ ” or “ ▼ ” and it will count continuously up or down, when
it reaches the temperature you want release and it will stop. It will confirm after 5 seconds