23
23
Freedivers Recovery Vest Mark II-S
copyright Oceanic Safety Systems LLC., 2015
LOADING THE ACTUATOR SPRING
In order to load the spring with enough force to pierce the dual cartridges, you need to screw down
the spring-loading cap with considerable force. After the actuator has fired, first unscrew the cap until
the trigger is cocked. You can see and hear when this occurs. When the trigger is loaded, you must
screw down the cap until the green band appears as shown below.
The actuator is not properly
loaded unless the green band is exposed!
UNLOADED—NO
GREEN SHOWING
UNSCREW THE SPRING
COMPRESSION KNOB
UNSCREW UNTIL
TRIGGER SNAPS
INTO PLACE
TRIGGER UNLOADED
TRIGGER LOADED
SCREW DOWN UNTIL
APPEARANCE OF THE
GREEN RING CONFIRMS
THE ACTUATOR IS BOTH
COCKED AND THE SPRING
IS FULLY LOADED. IF
YOU SCREW THE SCREW
CAP FULLY, BE SURE TO
BACK IT OFF 1/4 TURN,
OTHERWISE IT WILL STICK
TIGHT.