5.
Apply a generous line of silicone on the side of the
base where it comes into contact with the bathtub (along
the tiling flange).
6.
Remove the blocks and place the bathtub in its
final position, and connect the drain.
7.
Make sure there are 2 studs in the following locations
(one at the end of the base, the other next to the
bathtub's side).
8.
Secure the tub to the wall. First, drill the tiling
flange, then insert the screws in these same holes.
The holes drilled in the flange must be larger than
the screw diameter.
9.
Install the drywall and the ceramic.
10.
Door Installation:
If you have a
Marelia sliding door
, go to step 11.
If you have a
California hinged door
, go to step
12.
