Œ
Hose
NOTICE: Bristle wear, pool
bottom, temperature, etc.,
w i l l a l l a f f e c t c l e a n e r
operation. Use these general
guidelines to adjust your cleaner
For pools larger than 8,0 m, add a 2,4 m extension
for best performance.
hose.
For pools smaller than 8,0 m, try the hose as it is.
If 9.7 m is too much, remove the 2,4 m section and use
only the 7,3 m hose.
The hose was designed specifically for the cleaner.
Use of a different type of hose will reduce the cleaner’s
performance.
If you attach an unidapt handle to the swivel for manual
vacuuming be sure it is a special, floating unidapt handle.
Use of a different unidapt handle will hinder the
cleaner’s performance.
Adapts hose to skimmer.
Keeps hose in place in skimmer when pump stops.
WARNING
Hazardous suction. Can trap or tear hair or
body parts. Install vacuum regulator on all high-
vacuum systems.
Most systems require vacuum regulator for safe
operation.
Regulator provides vacuum relief in case cleaner
suction is blocked.
Black rubber diaphragm must always be submerged.
If it sucks air the pump will lose prime which could
damage the pump.
If pump suction is too weak to give adequate motion to
cleaner try removing the vacuum regulator and
operating the cleaner without it.
4
4
4
4
4
4
4
4
4
4
4
4
Brush Adjustment
The unit includes a 7,3 m hose and a 2,4 m hose
which will proivide excellent coverage in pools up to
8,0 m.
•
Swivel Assembly
Insert assembly into cleaner body and turn ¼ turn
clockwise.
Ž
Reducer Cone
•
Automatic vaccum regulator
Tight circles
clockwise
Moderate circles
clockwise
Straight ahead
travel
Automatic Pool Cleaner suited for flat
or dish bottom pools
Ocean Vac 8000
More about cleaner
and accessoires
