Ocean ODY 9 VS, Руководство пользователя

Страница: 16 / 36

Prior to using the machine for the first tim
IF AVAILABLE
•
Check whether the electricity and supply water specifications match the values indicated by the
installation instructions for the machine.
•
Remove all packaging materials inside the machine.
•
Set the water softener.
•
Add
1
kg salt into the salt compartment and fill with water up to a level at which it will almost
overflow.
•
Fill the rinse aid compartment.
The importance of water decalcification
For a good washing function, the dishwasher needs soft, i.e. less calcareous water. Otherwise, white
lime residues will remain on the dishes and the interior equipment. This will negatively affect your
machine’s washing, drying and shining performance. When water flows through the softener system,
the ions forming the hardness are removed from the water and the water reaches the softness
required to obtain the best washing result. Depending on the level of hardness of the inflowing water,
these ions that harden the water accumulate rapidly inside the softener system. Therefore, the
softener system has to be refreshed so that it operates with the same performance also during the
next wash. For this purpose, dishwasher salt is used.
We recommend that you use small-
grained or powder softener salt.
Do not put table salt into your machine.
Otherwise, the function of the softener
compartment may decrease over time.
When you start your dishwasher, the salt compartment gets filled
with water. Therefore, put the softener salt prior to starting your
machine.
This way, overflowing salt gets immediately cleaned up through the wash operation. If you are
not going to wash any dishes immediately after putting salt, then run a short washing program
with an empty machine in order to avoi
d any damage ( to prevent corrosion ) to your machine due
to the salt overflow while filling in the salt container.
PREPARING THE MACHINE FOR USE
15
ENGLISH
Use softener salt specifically
produced for use in dishwashers. To
put softener salt, first remove the
lower basket and then open the salt
compartment cap by turning it
counter clockwise.1 2 At first use fill
the compartment with
1
kg salt and
water3 at overflowing level If
available,using the funnel 4provided
will make filling easier. refit the cap
and close it After every 20th-30th
wash, add salt into your machine
until it fills up (approx. 1 kg)
Fill the salt compartment with water
at first use only.
ENGLISH
Filling with salt
(IF AVAILABLE)
In order to understand whether or not the amount of softener salt in your machine is sufficient, check
the transparent section on the salt compartment cap. There is sufficient salt if the transparent section
is green. Salt has to be added if the transparent section is not green
3
1
SAL
T
4
2