Ocean Way Audio Pro2A, Руководство по эксплуатации

Страница: 14 / 20

Selecting Digital Inputs:
If you want to use the direct digital inputs, it’s very simple once you’ve toggled through the simple set-up.
Steps are: Using a small blunt tool (like the cotton swap stick one end removed) push and hold the LED
selector switch for a full second and LED #1 will be
“OFF” and LED #2 is now “ON”. Now you’re in the
digital input mode.
AES/EBU requires the user to tell the speaker
if it’s the left channel or right channel so… press the LED
selector switch for a ½ second or less until only LED #3 is blinking. Press and hold the LED selector
switch for one full second and LED #3 will be
“ON” solid.
The speaker is now digital left channel.
Press the LED selector switch for a ½ second or less and until LED #3 and LED #4 are blinking together.
Press and hold the LED selector switch for one full second and LED #3 and LED #4 will be
“ON” solid.
The speaker is now digital right channel.
To return to the Analog input mode:
Push and hold the LED selector switch for a full second and LED #1 will be
“ON” and LED #2 is “OFF”.
Now you’re back in the Analog input mode.
Selecting Digital or Analog Inputs