Ocean Technology Systems MilCom Surface Station 6000S, Руководство пользователя

Страница: 22 / 32

O
TS MIL
CO
M
S
URF
ACE
16
5. Disconnect the battery from the PCB and remove the battery from the battery
bracket.
6. Place the battery into the replacement battery bracket. Place the battery brack-
et onto the panel assembly, lining the bracket mounting holes with the mounting
holes of the PCB.
7. Using a Philips head screw driver, Replace the four battery bracket screws.
8. Flip the panel assembly back over and place it back into the case assembly.
Replace the ten panel screws to secure the Panel to the case.
NOTICE: Tighten the screws tightly, otherwise the O-rings will not prevent
water from intruding into the unit.