Ocean Sonics Processing Buoy User Guide
April 2020
P.10
Appendix A
Confirming Voltages
A voltmeter can be used to confirm the proper voltage is being supplied to the array on the
buoy.
1.
Place the negative voltmeter lead (black) into pin 1 of the MCBH8F bulkhead.
connector on the battery pack end cap for the common connection (pinout below).
2.
Place the positive voltmeter lead (red) into pin 7 (pinout below).
Fully Charged Batteries should measure approximately ~25 V.
Batteries should not be discharged past 21 V.
MCBH8F Bulkhead Connector
Pinout