PLB1 USER MANUAL
6
912S-01260 v02.21
10/08/2022
2.
PLB1 OVERVIEW
1.
Antenna rewind knob
2.
Antenna pull grip
3.
Strobe light
4.
Indicator LED
5.
ON key (under flap)
6.
Test key (under flap)
7.
Lift up flap
8.
Lanyard fixing (on rear of case)
The unique cradle mounting system allows the PLB to
be easily attached to a belt, clothing or other protec-
tive equipment. Simply fit the rubber strap around the
mounting point and attach to the cradle as shown.
The cradle securely clips to the PLB at the four fixing points.
The PLB can also be carried in the supplied (Australia and
New Zealand units only) flotation pouch. Secure the pouch
to your clothing using the belt loop on the rear of the pouch.
For non AUS/NZ customers the Flotation pouch is available
as an accessory with part number 731S-04078.
!
When attaching the PLB1 to a life jacket or other personal flotation device ALWAYS refer
to the manufacturer's instructions for correct installation.
!
Secure PLB1 using lanyard attachment
!
Once affixed using the cradle or pouch, the PLB should be securely tethered to your
person or clothing using the supplied lanyard. This will guard against accidental loss if
the PLB is unknowingly removed from its housing.
!
Following registration (see section 5.7) the PLB is supplied with a clear label to protect
the UIN information on the rear of the product. Fit this before use.
