Ocean Rodeo Go Joe Скачать руководство пользователя страница 7

WARRANTY

All standard Ocean Rodeo products available through 
Ocean Rodeo Dealers or Ocean Rodeo Online are 
covered by a One Year Warranty offered to the original 
purchaser on workmanship, with a One Year Warranty 
on materials. Warranty is limited to the repair or 
replacement of the Ocean Rodeo product at our option. 
The Warranty does not cover damage caused by normal 
wear and tear, fading, color bleeding from wet storage, 
high speed crashes, misuse or negligence, but not 
limited to punctures, sun exposure, seam failure due 
to over inflation by pump or heat exposure, damage 
caused by use in waves or shore break, and damage 
caused by anything other than defects in material and 
workmanship. This warranty is invalid if unauthorized 
repairs have been carried out. Repairs or alterations not 
covered by warranty will be charged to the customer. 
Latex dry suit seals are exempt from warranty.

Discontinued products purchased from Ocean Rodeo 
Dealers or Ocean Rodeo Online carry a 90 day warranty.

Factory seconds, used, or demo gear purchased on the 
Online Auction Site carry no warranty.

Ocean Rodeo products used in schools, rentals or other 
professional applications carry a 30 day warranty.

Содержание Go Joe









Отзывы: