Ocean Protect OceanGuard, Руководство по установке

Страница: 5 / 6

Ocean Protect | OceanGuard Installation Guide
Page 4 of 5
5. Align T-strut onto L-brackets and secure with pop rivets, repeat for second strut
Flow Diverter Install
1. Measure the internal dimensions of the pit at the height at which the plastic is to sit. If necessary
trim flow diverter panels to fit internal dimensions (add an additional 20mm each side to ensure
tight pressure fit)
2. With the plastic bent slightly upwards, lower the Top Section into the pit, guiding the unit so that it
locates on the T Sections struts.
3. Drill a 5mm hole through the flow diverter and into the strut for each T-strut, and secure the flow
diverter to the T-strut with a pop rivet. NOTE: if you OceanGuard requires a Filtration Cage this
step can be skipped and addressed as part of the Filtration Cage Installation.